Sewing - Believe it or not, I cut these out "last" Christmas and never got to sew them. They are fun and easy to do, so I thought I'd do a tutorial for you. I made mine semi-circular and really think they will do nicely as a dinner napkin. I made 14. You could easily adjust your pattern to make a full circle.
Note: It took one package of ric-rac to do three napkins. These look really cute without trim and the time would be much shorter. Enjoy! If you make some, please let me know!
1. To do 12-14, you will need 2 yards each of coordinating Christmas fabric, 5 packages of contrasting ric-rak, one package of Steam-A-Seam2 double stick fusible tape, and matching thread.
2. I made a quarter-round pattern that measured 10" on each side and a 10" radius. The pattern was placed on the fold so that I would get a semi-circle. For each napkin, cut one of each of the two coordinating fabrics on the fold.
3. Baste the ric-rac along the outer curved edge of one of the pieces of fabric. Note that the sewing line will be "slightly right" of the center of the ric-rac.
4. Place the coordinating pieces right sides together. Tug & pull until all sides & corners align well. Pin carefully. Using your basting seam as a guide, sew a "needle width" to the left of the basting line all around the napkin. Leave a three inch opening near one end on the straight side. Trim about half of the seam allowance all around the napkin EXCEPT the opening. Leave the full seam allowance at the opening. Press the napkin well before turning it right side out.
5. Turn the napkins right sides out. Press extremely well, tugging on the ric-rac. Make sure all edges are pressed to the seam edge. Place a strip of the Steam-A-Seam2 in the opening on one of the seam allowances. Press. Peel the paper tape off. Close the opening and press well.
6. Folding. Make note that the "center fold" of the napkin is 1" off-center.
Fold left side to "off center" fold.
|
Fold right side to meet left edge. |
Turn napkin over & adjust if needed. |
No comments:
Post a Comment